Project MIELKO First Generation Civic SB1 from Holland

[Steph]

You scratch built a pair of coilovers? That is super cool!!!

[mielko]

Total cost for complete build of 4 New coilovers Will be around 130Euro.
Just a bit less then BC-racing

[mielko]

Take the effort to grind all the bumps and burrs out off the intake,welded thread to house the hose pillars(is that correct english?) to provide vacuum to the brake booster.rewelded the thermostat housing,so that it lines up with the other pipe.







Made something for my other honda,
a child seat for my son,he grow out off his basket seat .






quite a difference

[Blue-Civic-Hybrid]

Mielko,

I just re-read everything from page 1 till 28 and I must say you are a damn genius! Please keep going with the updates and I cannot wait to see what you come up with next...

And sorry about killing a Del Sol/ CRX to make my wagon great again!!

Regards,
Brian

[mielko]

If you bought a Electric roof delsol. You could have lifted The wagon shell Electric

[mielko]

Almost done ,last thing to do ,is surfacing the flanges .











:crazy:

[Randy]

That looks great real nice workmanship, but how will it fit?

[mielko]

Yes,it fits






Some other puzzle is already lurking to be build.A 4in1 motocycle header to be made fit to my engine

[Phil]

This looks awesome! glad it fits

[mielko]

good to be back!!!

So time to refresh here.

I'v rebuild a EN4 oilpump to fit my new engine .
I took it apart,cleaned ,and wet blasted the housing.
When i rebuild it,i used the thinest gasket i had,the rotor was stuck,and did,nt rotate by hand,i remade a gasket 0,01 thicker,stuck again .I did this until the pump rotor turned freely by hand.I asume this is the correct way to rebuild it?

EB3 vs EN4 rotor




finished product.