Project Bob78CVCC

Civic 1973-1979 Projects
Locked
User avatar
bob78cvcc
LSD
LSD
Posts: 1686
Joined: May 2nd, 2008, 9:22 pm
Province/State: NJ

Bob78CVCC Project

Unread post by bob78cvcc »

Thank you Pete!
Going to look at the seats next.
I have a spare set of seats.
I'm thinking about a houndstooth insert on the spares that
matches the blue interior and getting the front seat shoulders replaced
on the seats in my car.

Neal designed a bunch of replacement choices on spoonflower several years ago.
I ordered some sample fabrics to play with.

https://www.spoonflower.com/profiles/neal
Attachments
rrblue_houndstooth_shop_thumb.png
rrblue_houndstooth_shop_thumb.png (111.35 KiB) Viewed 2985 times
rrhoundstooth_lblbk_shop_thumb.png
rrhoundstooth_lblbk_shop_thumb.png (124.78 KiB) Viewed 2985 times
rrhoundstooth_lblue_shop_thumb.png
rrhoundstooth_lblue_shop_thumb.png (131.31 KiB) Viewed 2985 times
rrspecial-h-right_shop_thumb.png
rrspecial-h-right_shop_thumb.png (13.37 KiB) Viewed 2985 times

User avatar
bob78cvcc
LSD
LSD
Posts: 1686
Joined: May 2nd, 2008, 9:22 pm
Province/State: NJ

Bob78CVCC Project

Unread post by bob78cvcc »

Kurt wrote:
December 22nd, 2013, 2:51 pm
if you get some silver paint and a fine tip brush from a hobby or craft store you can color in the HONDA on the AC unit
Still working on getting the letters done;
However, I restored the silver lines on the AC vents.
Attachments
AC Vents Refinish.JPG

User avatar
Thor
LSD
LSD
Posts: 3624
Joined: November 30th, 2005, 8:05 am
Great Britain
Province/State: Stratford upon Avon
Model: —————-

Bob78CVCC Project

Unread post by Thor »

Bob,
With regard to the letters, have you thought of over-laying adhesive chrome pin-stripe tape, then using a sharp scalpel to cut around the letters? This would give you a mirror-finish chrome.

User avatar
bob78cvcc
LSD
LSD
Posts: 1686
Joined: May 2nd, 2008, 9:22 pm
Province/State: NJ

Bob78CVCC Project

Unread post by bob78cvcc »

Thor wrote:
August 7th, 2017, 6:59 am
Bob,
With regard to the letters, have you thought of over-laying adhesive chrome pin-stripe tape, then using a sharp scalpel to cut around the letters? This would give you a mirror-finish chrome.
Pete, that could end up being a possibility if I'm not successful with the paint.

User avatar
bob78cvcc
LSD
LSD
Posts: 1686
Joined: May 2nd, 2008, 9:22 pm
Province/State: NJ

Bob78CVCC Project

Unread post by bob78cvcc »

Decided it was time to freshen up the engine bay.
Re sprayed the air filter box and pre heater vacuum valve assembly and some other vacuum switch.
Letting the cover fully dry before putting it back together.
Attachments
IMG_6631.JPG
IMG_6634.JPG
IMG_6635.JPG
IMG_6638.JPG

User avatar
Randy
Administrator
Administrator
Posts: 1450
Joined: April 7th, 2005, 9:06 pm
Canada
Province/State: Ontario
Hometown: Ajax
Model: 1978 Hatchback

Bob78CVCC Project

Unread post by Randy »

That cleans that up nicly, looks great 😃 👌
Welcome to the Site.

User avatar
bob78cvcc
LSD
LSD
Posts: 1686
Joined: May 2nd, 2008, 9:22 pm
Province/State: NJ

Bob78CVCC Project

Unread post by bob78cvcc »

Finally done with refinishing the air filter box & alternator.
Attachments
Engine Bay Refinish 1.JPG

User avatar
Randy
Administrator
Administrator
Posts: 1450
Joined: April 7th, 2005, 9:06 pm
Canada
Province/State: Ontario
Hometown: Ajax
Model: 1978 Hatchback

Bob78CVCC Project

Unread post by Randy »

Bob, do you ever start your car 🚗? I don't see any dust on it. Super Clean!
Welcome to the Site.

User avatar
Thor
LSD
LSD
Posts: 3624
Joined: November 30th, 2005, 8:05 am
Great Britain
Province/State: Stratford upon Avon
Model: —————-

Bob78CVCC Project

Unread post by Thor »

Bob,
the air filter butterfly nut is not straight.
Mind, personally I always turn mine to ''quarter-to-three'', not ''twelve-thirty''
ps only joking.
It is superb, as ever.
Pete
Please pm the appropriate rude answers as Randy wishes to keep the site clean.

User avatar
Kurt
LSD
LSD
Posts: 2082
Joined: August 3rd, 2005, 12:56 am
Canada
Province/State: British Columbia
Hometown: Maple Bay
Model: —————-

Bob78CVCC Project

Unread post by Kurt »

Thor wrote:
August 7th, 2017, 6:59 am
Bob,
With regard to the letters, have you thought of over-laying adhesive chrome pin-stripe tape, then using a sharp scalpel to cut around the letters? This would give you a mirror-finish chrome.
Thats a great idea. I might just have to try that. I have no idea how Honda would have chromed that bit in the first place.

Locked