Project Blue-Civic-Hybrid 1975 CVCC Wagon

[Blue-Civic-Hybrid]

Sorry Blue I missed the 2 exhaust port heads which came out in 79-81. This was the standard, 2 exhaust ports, except for the California spec EK, those had the 4 exhaust ports.

The non CVCC heads were 4 exhaust ports.

So this is a CVCC motor then and it will take a 1982 electronic distributor right? It had one in there before I broke it so I guess I will buy another one.

I will need to rewire some of this since I noticed my resistor system is still hooked up, any handy DIY guides on how to rewire it to use the full potential of the ignition systems since I have no points at all?

[LALAMAHINA]

I rewired my 78 wagon to run a 2nd gen Hitachi electronic distributor. So to answer your question, yes it should be able to be used on your engine.

I posted a how- to in one of Kurt's post in the Power Train section.

I have a working electronic distributor if your interested?

[Blue-Civic-Hybrid]

I rewired my 78 wagon to run a 2nd gen Hitachi electronic distributor. So to answer your question, yes it should be able to be used on your engine.

I posted a how- to in one of Kurt's post in the Power Train section.


I have a working electronic distributor if your interested?

Thanks bud, I will look around in that section and see if I can find it.

As for your distributor, let me figure out the wiring first then I will ask you how much you want for it.

[LALAMAHINA]

If you need better photos, let me know.

[Blue-Civic-Hybrid]

PM sent to you...

[Blue-Civic-Hybrid]

Well, just a slight update on my tiny project. I went on an extended vacation and I got distracted badly. The one good part is my wagon is currently tucked in my tiny 1 car garage and I kinda picked up another project on the way...


And my newest distraction, a 1985 Honda VF500F... I could not pass up the deal I got on this...


I still have no idea how I'm gonna explain this to my significant other....

[Bill]

"...It has a back seat..." No, didn't work for me either.... Cool bike, I always liked those. Maybe the right deal will come my ways, but not so far!
=Bill

[Blue-Civic-Hybrid]

"...It has a back seat..." No, didn't work for me either.... Cool bike, I always liked those. Maybe the right deal will come my ways, but not so far!
=Bill

Oh trust me, that back seat will be removed/covered up with a box to mimic a cafe racer style seat. And yes it will be boxy!

[Blue-Civic-Hybrid]

Well, Photbucket is holding my pics hostage right now, so I will upload pics to update this thread.

Currently I'm about to embark on a cross country move from Florida to California due to my retirement from the Navy. Once I get settled I will begin more updates on my wagonce I can start deciding on what engine to swap into her and start working on the body hopefully after that.

[Blue-Civic-Hybrid]

Testing for uploading pics... Instead of re-jetting the Weber 32/36 carburetor, I'm gonna try this fuel pressure regulator since i think the previous owner installed bigger jets. The re-jetting kit was gonna cost about $70 and this was only $30. Hopefully this stops the excess fuel fouling my plugs and lets me drive this bad boy!