Project Blue-Civic-Hybrid 1975 CVCC Wagon
-
- LSD
- Posts: 2091
- Joined: October 18th, 2006, 3:54 am
- Province/State: Oregon
Re: My 1975 CVCC Wagon project...
It's on the rear left corner of the engine block.
If your standing on the right side of the car, look to the left of the starter area on the engine block, you might need a rag to clean off the pad.
If your standing on the right side of the car, look to the left of the starter area on the engine block, you might need a rag to clean off the pad.
- Blue-Civic-Hybrid
- Projects
- Posts: 126
- Joined: June 30th, 2015, 12:35 pm
- Province/State: San Diego, CA.
- Hometown: San Diego
- Model: 1975 Wagon CVCC
Re: My 1975 CVCC Wagon project...
Thanks LALA, I will check it out later today and see if it is the original CVCC motor or some sort of swap...
- Blue-Civic-Hybrid
- Projects
- Posts: 126
- Joined: June 30th, 2015, 12:35 pm
- Province/State: San Diego, CA.
- Hometown: San Diego
- Model: 1975 Wagon CVCC
Re: My 1975 CVCC Wagon project...
Just checked my engine code on my car and this is what I saw on the block: EK-1209905
I just did a quick search and I apparently have a CVCC engine, it's just a 1.8 and a 1982 apparently. Please let me know if I am wrong thinking this...
I will post pics later...
I just did a quick search and I apparently have a CVCC engine, it's just a 1.8 and a 1982 apparently. Please let me know if I am wrong thinking this...
I will post pics later...
- Blue-Civic-Hybrid
- Projects
- Posts: 126
- Joined: June 30th, 2015, 12:35 pm
- Province/State: San Diego, CA.
- Hometown: San Diego
- Model: 1975 Wagon CVCC
My 1975 CVCC Wagon project...
I need to put some pics up here of the engine stamp...
Last edited by Blue-Civic-Hybrid on August 13th, 2017, 7:30 pm, edited 2 times in total.
- 1974civic1200
- Member
- Posts: 28
- Joined: November 21st, 2016, 7:28 am
- Province/State: Ohio
Re: My 1975 CVCC Wagon project...
I have all the orginal hinges and latches. Send a pm if interested
- 1974civic1200
- Member
- Posts: 28
- Joined: November 21st, 2016, 7:28 am
- Province/State: Ohio
Re: My 1975 CVCC Wagon project...
I have the hood latches and hood hinges PM me if interested
- Blue-Civic-Hybrid
- Projects
- Posts: 126
- Joined: June 30th, 2015, 12:35 pm
- Province/State: San Diego, CA.
- Hometown: San Diego
- Model: 1975 Wagon CVCC
Re: My 1975 CVCC Wagon project...
PM sent to you 1974civic1200...
Now just waiting for some of the engine gurus to check out my engine stamp...
Now just waiting for some of the engine gurus to check out my engine stamp...
-
- LSD
- Posts: 2091
- Joined: October 18th, 2006, 3:54 am
- Province/State: Oregon
Re: My 1975 CVCC Wagon project...
Can you post a photo of your engine?
There are 2 different EKs 79-81and 82-83. If yours is a 82, from the drive side of the engine, the 1st port on your head is exhaust?
1st EK valve line up is IEEIIEEI and the 2nd is EIEIIEIE.
Good luck!
There are 2 different EKs 79-81and 82-83. If yours is a 82, from the drive side of the engine, the 1st port on your head is exhaust?
1st EK valve line up is IEEIIEEI and the 2nd is EIEIIEIE.
Good luck!
- Blue-Civic-Hybrid
- Projects
- Posts: 126
- Joined: June 30th, 2015, 12:35 pm
- Province/State: San Diego, CA.
- Hometown: San Diego
- Model: 1975 Wagon CVCC
Re: My 1975 CVCC Wagon project...
Thanks again LALA, I will check it tomorrow once I am off work.
- breakupthespace
- Short Shifter
- Posts: 43
- Joined: December 18th, 2013, 2:27 pm
- Province/State: Portland, OR
Re: My 1975 CVCC Wagon project...
Nice - I have a 75. It was a heck of a time rebuilding the engine and getting parts, and I'm still working on it ;)
Nice score.
Nice score.