Project 1979 Honda Civic CVCC almost complete

Eduardo I. Nieves Davila · June 23rd, 2008, 9:24 am

Yeah sory got mixed with the valve cover

. The Ed3 could have made that kind of horse power, you would just need the ef crank and rods and the 75 flat pistons

speedycvcc · Post by **speedycvcc** » July 1st, 2008, 1:08 pm

Well i decided to take some pictures while the car is apart again due to a snapped axle. Here is a picture of one of the custom made camber plates.

Here is a quick picture of the oil cooler hiding behind the grill.

These are the sparcos that were just installed. They are Sparco Steel seats.

And here are some shots of the suspension while that is out of the car.

Adams03 · Post by **Adams03** » July 2nd, 2008, 4:30 am

very nice!!

darkvador74 · Post by **darkvador74** » July 19th, 2008, 3:11 pm

This is a style of car that I like! It is simple, clear and net! Tubby voucher. If has you other photos,...

79 · Post by 79 » July 19th, 2008, 9:04 pm

WOW!!

mugen79 · Post by **mugen79** » July 24th, 2008, 5:12 am

i want those camber plates! do you have a template?

speedycvcc · Post by **speedycvcc** » July 24th, 2008, 9:07 pm

I have just finished working out all the bugs in the plates. there many parts involved and there is a difference between 1200 and cvcc. The machinist has all the programs for my cvcc. also the top of the strut has to be turned down to fit the spherical bearing. If anyone is interested I can ask him what it would cost.

Bill · Post by **Bill** » July 25th, 2008, 4:00 am

There has been a lot of interest over the last year, it would be a service to ask for the rest of the board. Please.

mugen79 · Post by **mugen79** » July 25th, 2008, 4:39 am

so wait theres a differnce between the 1200 and the cvcc?

speedycvcc · Post by **speedycvcc** » July 25th, 2008, 6:24 pm

I am not sure about all the years but my 79 cvcc has a larger bolt circle then the top that came with the 74 1200 openable struts.

1StGenOfDurham

1StGenOfDurham

Project 1979 Honda Civic CVCC almost complete