Well this is it!!!! the final push this weekend to get the car to the paint shop on Monday woo woo :D
I have my work cut out for me tho, it isn't going to be easy, there is still a fair few things to finish off,
-Finish stripping paint from engine bay
-Finish body work on end panel
-Stop for a beer brake
-Strip paint from door jams
-Remove gear selector and e brake cable
-probably do for a top up on the beer by now
-scrape old under coat from under side of body, engine bay and wheel wells.
-Apply rust converter to any surface rusted areas.
I think that should sum things up, but I'm sure there will be more. Here are some pics of were I sit so far.
Restoration Islander's First Generation Honda Civic
-
islander
- PanaSport
- Posts: 295
- Joined: April 13th, 2009, 1:34 am
- Province/State: Shawnigan Lake, British Columbia
- Attachments
-
- DSC02483.JPG (136.25 KiB) Viewed 993 times
-
- DSC02482.JPG (134.53 KiB) Viewed 993 times
-
- DSC02481.JPG (137.93 KiB) Viewed 993 times
-
- DSC02479.JPG (131.39 KiB) Viewed 993 times
-
- DSC02478.JPG (128.68 KiB) Viewed 993 times
-
- DSC02477.JPG (128.26 KiB) Viewed 993 times
Every old car deserves a second chance!
Sooo are you saying you can reproduce that one and add it to the other decals? -
islander
- PanaSport
- Posts: 295
- Joined: April 13th, 2009, 1:34 am
- Province/State: Shawnigan Lake, British Columbia
-
Layspeed
- PsychoCiv
- Posts: 951
- Joined: September 5th, 2005, 3:40 pm
- Province/State: Alberta
- Hometown: Edmonton
- Model: 1978 Wagon CVCC
nice Toyota trucks too!
'78 Civic Wagon : '91 CR-X Si : '99 Odyssey : '99 CR-V : '77 Civic Wagon : '03 Pilot :
-
islander
- PanaSport
- Posts: 295
- Joined: April 13th, 2009, 1:34 am
- Province/State: Shawnigan Lake, British Columbia
It has been a VERY busy few days. Just an up date on the project. The car made it down to the shop on Sunday without any problems, except for a little bit of rain, didn't get much of a chance to work on it do to Mondays been busy at the shop. Tuesday got the outside of the car primed and the interior painted. Today I was so stoked on the progress from yesterday I decided to get to the shop early (4:30am) to get some more work done. I managed to completely prep the car and get all the needed seam sealing done by 7:30. The car got painted first thing today :D :D In my honest opinion it turned out AMAZING!! absolutely everything I was hopping for. I also picked up my steel braided break lines I had made up, also I am very pleased. I will be bringing it home tomorrow to start the reassembly.
- Attachments
-
- DSC02500.JPG (136.04 KiB) Viewed 1002 times
-
- DSC02499.JPG (125.99 KiB) Viewed 1002 times
-
- DSC02493.JPG (133.95 KiB) Viewed 1002 times
-
- DSC02492.JPG (135.08 KiB) Viewed 1002 times
-
- DSC02491.JPG (118.16 KiB) Viewed 1002 times
-
- DSC02490.JPG (122.42 KiB) Viewed 1002 times
-
- Underside all clean of old under coat
- DSC02489.JPG (132.6 KiB) Viewed 1002 times
-
- DSC02488.JPG (120.28 KiB) Viewed 1002 times
-
- DSC02487.JPG (119.13 KiB) Viewed 1002 times
-
- In the booth ready for priming
- DSC02486.JPG (125.3 KiB) Viewed 1002 times
Every old car deserves a second chance!
-
islander
- PanaSport
- Posts: 295
- Joined: April 13th, 2009, 1:34 am
- Province/State: Shawnigan Lake, British Columbia
more pics
- Attachments
-
- DSC02498.JPG (118.02 KiB) Viewed 992 times
-
- DSC02496.JPG (141.15 KiB) Viewed 992 times
-
- break lines
- DSC02495.JPG (134.78 KiB) Viewed 992 times
-
- DSC02504.JPG (120.35 KiB) Viewed 992 times
-
- DSC02503.JPG (127.11 KiB) Viewed 992 times
-
- DSC02502.JPG (125.12 KiB) Viewed 992 times
Every old car deserves a second chance!
-
joshuao
- Mugen
- Posts: 667
- Joined: February 14th, 2006, 1:07 am
- Province/State: Queensland Australia