1979 Honda Civic Restoration and Modification

Civic 1973-1979 Projects
Post Reply
User avatar
koosjer55
JDM
JDM
Posts: 408
Joined: November 29th, 2005, 12:15 pm
Province/State: The Netherlands

new pics!

Post by koosjer55 »

Works continues (slowly but surely)..
Attachments
Latest score; a NOS rear window wiper set! Only not realy sure the switch - which comes with the set - will work out..we'll see
Latest score; a NOS rear window wiper set! Only not realy sure the switch - which comes with the set - will work out..we'll see
P1020632.jpg (144.63 KiB) Viewed 2939 times
Original shock compared with a CRX shock..needs some work before fitting..there's always hope!
Original shock compared with a CRX shock..needs some work before fitting..there's always hope!
PC310622.jpg (142.25 KiB) Viewed 2939 times
Back on its feet again. Engine frame freshly painted with anti-rust and all Superpro bushings installed.
Back on its feet again. Engine frame freshly painted with anti-rust and all Superpro bushings installed.
PC310630.jpg (135.87 KiB) Viewed 2939 times
Got the suspension back together (for the time being)
Got the suspension back together (for the time being)
PC310625.jpg (127.31 KiB) Viewed 2939 times
PC200610.jpg
PC200610.jpg (116.29 KiB) Viewed 2939 times
On page 1 you can see how this looked before
On page 1 you can see how this looked before
PC200604.jpg (136.94 KiB) Viewed 2939 times
Untitled-2.jpg
Untitled-2.jpg (124.56 KiB) Viewed 2939 times

User avatar
koosjer55
JDM
JDM
Posts: 408
Joined: November 29th, 2005, 12:15 pm
Province/State: The Netherlands

Post by koosjer55 »

MIG, I'll pass the compliments thru to Dennis the welder :)

User avatar
koosjer55
JDM
JDM
Posts: 408
Joined: November 29th, 2005, 12:15 pm
Province/State: The Netherlands

Post by koosjer55 »

3 more pics
Attachments
P1030644.jpg
P1030644.jpg (112.45 KiB) Viewed 2873 times
Finally a good result with the grille. Took me 6 or 7 times, mainly caused by terrible masking tape..in the end finally found a good one, that didn't ripped the paint right off. Also attached the new emblem, looks sweet!
Finally a good result with the grille. Took me 6 or 7 times, mainly caused by terrible masking tape..in the end finally found a good one, that didn't ripped the paint right off. Also attached the new emblem, looks sweet!
P1030640.jpg (63.82 KiB) Viewed 2873 times
Rear chassis parts taken off, cleaning and painting can be started next Friday (incl. Superpro bushings)
Rear chassis parts taken off, cleaning and painting can be started next Friday (incl. Superpro bushings)
P1030637.jpg (124.63 KiB) Viewed 2873 times

User avatar
koosjer55
JDM
JDM
Posts: 408
Joined: November 29th, 2005, 12:15 pm
Province/State: The Netherlands

Post by koosjer55 »

Got lucky with the last '78-'79 emblem CMSNL.com had to offer. A friend of mine has the last '73-'77 emblem they had in stock.

The shocks are indeed from a 2nd gen. CRX ('88-'92). It will be a try-out when all is ready. I'm thinking about putting the front springs on the rear shocks, but I've to gather more info on that.

User avatar
koosjer55
JDM
JDM
Posts: 408
Joined: November 29th, 2005, 12:15 pm
Province/State: The Netherlands

Post by koosjer55 »

I actually used very simple Motip paint:

Primer Grey
Wheel Spray Silver
Masking the silver line with Slim Tape Gold and then
Lacquer Black Matt
I'm thinking about clear coating it for more protection, but on the other hand, I don't want it to be glossy.

User avatar
koosjer55
JDM
JDM
Posts: 408
Joined: November 29th, 2005, 12:15 pm
Province/State: The Netherlands

little update

Post by koosjer55 »

Here's a little update on the project.
Attachments
Very happy with the result of a fresh sandblasting (glass/bead blasting) job! Thinking about polishing the outer ring and painting the spokes black, though not quite sure about that..
Very happy with the result of a fresh sandblasting (glass/bead blasting) job! Thinking about polishing the outer ring and painting the spokes black, though not quite sure about that..
P1170653.jpg (147.36 KiB) Viewed 1896 times
Rear chassis parts all cleaned up and painted with rust protector. Again a couple of poly bushings from Super Pro will enhance the suspension.
Rear chassis parts all cleaned up and painted with rust protector. Again a couple of poly bushings from Super Pro will enhance the suspension.
P1170652.jpg (131.36 KiB) Viewed 2631 times

User avatar
koosjer55
JDM
JDM
Posts: 408
Joined: November 29th, 2005, 12:15 pm
Province/State: The Netherlands

little pic update

Post by koosjer55 »

Process continues..
Attachments
Discoverd some more rust underneath the car...darn
Discoverd some more rust underneath the car...darn
P2070675_.jpg (91.11 KiB) Viewed 2536 times
Sprayed it with anti gravel
Sprayed it with anti gravel
P2070670_.jpg (90.79 KiB) Viewed 2536 times
Painted with Owatrol (stops the rust process)
Painted with Owatrol (stops the rust process)
P1310665_.jpg (90.86 KiB) Viewed 2536 times
Fuel tank fix up
Fuel tank fix up
P1310663_.jpg (72.18 KiB) Viewed 2536 times
P2070673_.jpg
P2070673_.jpg (83.13 KiB) Viewed 2536 times
rear drumbreaks refurbished
rear drumbreaks refurbished
P1300656_.jpg (88.16 KiB) Viewed 2536 times

User avatar
koosjer55
JDM
JDM
Posts: 408
Joined: November 29th, 2005, 12:15 pm
Province/State: The Netherlands

Back in black!

Post by koosjer55 »

Just picked my wheels and brackets up from the powdercoater. Very happy with the result and can't wait how they'll look when the tire and centercap or on.
Attachments
turbines1.jpg
turbines1.jpg (120.28 KiB) Viewed 2464 times
turbines2.jpg
turbines2.jpg (122.49 KiB) Viewed 2464 times

User avatar
koosjer55
JDM
JDM
Posts: 408
Joined: November 29th, 2005, 12:15 pm
Province/State: The Netherlands

Post by koosjer55 »

here's a preview
Attachments
P3030697.jpg
P3030697.jpg (67.84 KiB) Viewed 2377 times

Pizze

Post by Pizze »

Here is a picture of the springs, its a bad picture but anyway.. :roll:
P040309_20.12.JPG
P040309_20.12.JPG (52.04 KiB) Viewed 133 times

Post Reply