Learning but getting there1979 Honda Civic Restoration and Modification
-
koosjer55
- JDM
- Posts: 408
- Joined: November 29th, 2005, 12:15 pm
- Province/State: The Netherlands
new pics!
My buddy gave me a quick lesson in how to handle the welding machine..fun to do,, but I'm not very fast and professional yet, but it's turning out alright
- Attachments
-
- Made a beginning with the inside (rear, next the wheel arch). Multiple plates that cover each other
- P4110715.jpg (148.6 KiB) Viewed 2186 times
-
- Rear wheel arch piece
- P4180719.jpg (96.7 KiB) Viewed 1453 times
-
- the back of it
- P4240725.jpg (137.62 KiB) Viewed 1453 times
-
- Back left..this is the inside plate. The outside will be quite tough to make out of one plate..
- P4240722.jpg (134.11 KiB) Viewed 1453 times
-
- Inside corner in the trunk..smoothing it comes later
- P4240723.jpg (149.71 KiB) Viewed 2186 times
-
- Inside..needs to be smoothed a little with the grinder
- P4180718.jpg (144.63 KiB) Viewed 2186 times
-
- rear
- P4180717.jpg (147.98 KiB) Viewed 2186 times
-
- floor bit
- P4110712.jpg (146.57 KiB) Viewed 2186 times
-
koosjer55
- JDM
- Posts: 408
- Joined: November 29th, 2005, 12:15 pm
- Province/State: The Netherlands
We're getting there!
Proces continues and hopefully the car can go to the paintshop within 1,5 week :D
- Attachments
-
- Superpro poly bushings at the back as well!
- P6200755.jpg (147.33 KiB) Viewed 2020 times
-
- P6200754.jpg (149.91 KiB) Viewed 2020 times
-
- Pic of the car underneath. This whole part took a lot of time. First welded a lot under the car (lot of rust!), cleaned and Owatrol-ed it. Anti gravel makes it all look tidy.
- P6200753.jpg (146.64 KiB) Viewed 2020 times
-
- Bottom right of the wheel arch has to be checked, but I think I'll let the painter do the filler bits..I'm bad with filler.
- P6200752.jpg (149.85 KiB) Viewed 2020 times
-
- P6200751.jpg (140.48 KiB) Viewed 2020 times
-
- P6200750.jpg (149.49 KiB) Viewed 2020 times
-
- It's back on its feet again! Also lots of cleaning and so called Owatrol (anti rust).
- P6200749.jpg (147.08 KiB) Viewed 2020 times
-
- Made the wiper motor fit the tailgate. The motor was in the same box as all the rest of the rear wiper pieces, but it isn't the exact correct model. 5-doors or maybe Accord?
- DSC00131.jpg (147.46 KiB) Viewed 2020 times
-
- Pretty proud of this piece! Learned the basics of welding a couple of months ago and kinda found my way with trial and error.
- P5230744.jpg (147.68 KiB) Viewed 2020 times
-
koosjer55
- JDM
- Posts: 408
- Joined: November 29th, 2005, 12:15 pm
- Province/State: The Netherlands
Thanks all! Here're some more pics. The new fenders do fit pretty easy, still don't know if they're original, could be...fine tuning will be done after I'm back from holiday.
- Attachments
-
- P6270758.jpg (141.61 KiB) Viewed 1960 times
-
- P6270757.jpg (140.68 KiB) Viewed 1960 times
-
- P6270756.jpg (149.97 KiB) Viewed 1960 times
-
koosjer55
- JDM
- Posts: 408
- Joined: November 29th, 2005, 12:15 pm
- Province/State: The Netherlands
Ready for paint!
Compared with the above pics it doesn't look like much is done in the last few weeks, but it's a lot of holiday-ing, sanding, welding, filling, cleaning and so on and so on. Anyway, this Tuesday the car is finally going to CustoMike, the painter! :D Can't wait to see the result..(and to hear what the costs will be :shock: )
- Attachments
-
- P8160834.jpg (146.53 KiB) Viewed 1830 times
-
- P8160833.jpg (147.04 KiB) Viewed 1830 times
-
- P8160832.jpg (149.08 KiB) Viewed 1830 times
-
- Stripes ready to go!
- P8160831.jpg (147.08 KiB) Viewed 1830 times
-
koosjer55
- JDM
- Posts: 408
- Joined: November 29th, 2005, 12:15 pm
- Province/State: The Netherlands
off to the paintshop!
We dropped the car at the paintshop...not cheap, but in good hands..next week I'm going to take a look, so I'll take some pics then
- Attachments
-
- P8200831.jpg (146.14 KiB) Viewed 1792 times
-
- P8200830.jpg (148.77 KiB) Viewed 1792 times
-
- P8200828.jpg (144.71 KiB) Viewed 1792 times
-
koosjer55
- JDM
- Posts: 408
- Joined: November 29th, 2005, 12:15 pm
- Province/State: The Netherlands
Today we went to the paintshop to have a look at the car. So far it's looking very good! Mike has straighten a lot of tiny dents, etc. I'm glad he sees things I've overlooked. This Monday we're going back to choose the exact color. TBC.
- Attachments
-
- P8280832.jpg (145.94 KiB) Viewed 1791 times
-
- P8280831.jpg (148.14 KiB) Viewed 1791 times
-
- P8280830.jpg (149.85 KiB) Viewed 1791 times
-
- P8280829.jpg (136.65 KiB) Viewed 1791 times
-
- P8280828.jpg (144.79 KiB) Viewed 1791 times
-
koosjer55
- JDM
- Posts: 408
- Joined: November 29th, 2005, 12:15 pm
- Province/State: The Netherlands
And the colour will be.....Volkswagen Hippie Green :D ! Great name for this retro colour! It's also the closest to the green Civic '75 brochure. I did find a '75 colourcode for green (named Cumulus Green), but that's nowhere near the green, pictured in the brochure. Anyway, I'm very happy that it's also an existing colour (can be handy when there's any damage in the future). TBC!
- Attachments
-
- P8310833.jpg (144.83 KiB) Viewed 1731 times
-
koosjer55
- JDM
- Posts: 408
- Joined: November 29th, 2005, 12:15 pm
- Province/State: The Netherlands
My painter got the colour card of the Volkswagen. He did also mix a green that was very close to this one, but I liked this Hippie Green more.
Btw, I don't think there are side skirts on the Civic from the brochure. Think it's cause of the fact the Civics in this brochure were probably filled in with colour after the photos were taken. At least, that's what my painter thinks.
Btw, I don't think there are side skirts on the Civic from the brochure. Think it's cause of the fact the Civics in this brochure were probably filled in with colour after the photos were taken. At least, that's what my painter thinks.