1979 Honda Civic Restoration and Modification

Civic 1973-1979 Projects
Post Reply
User avatar
koosjer55
JDM
JDM
Posts: 408
Joined: November 29th, 2005, 12:15 pm
Province/State: The Netherlands

Post by koosjer55 »

Not very much going on at this moment. This Friday we're going have another sneak at the paint shop and it probably will have some hippie green on it..hopefully! Any who, I'm addicted in buying new OEM bolts and nuts for everything that will be in sight, so the engine is blinging more and more (should have done what Kurt did a long time ago (zinc job on the bolts, etc.), but somehow I'm too lazy and cmsnl.com is too easy..and in the end too expensive, but whatever).
Also my girlfriend did a little vinyl re-spray on the interior panels.
Attachments
P9050835.jpg
P9050835.jpg (147.15 KiB) Viewed 1731 times
P9050834.jpg
P9050834.jpg (147.28 KiB) Viewed 1731 times
P9050833.jpg
P9050833.jpg (145.57 KiB) Viewed 1731 times

User avatar
koosjer55
JDM
JDM
Posts: 408
Joined: November 29th, 2005, 12:15 pm
Province/State: The Netherlands

Post by koosjer55 »

We used Motip vinyl spray black for the panels and about the colour hippiegreen..it's a bloody "doubt-maker"..we went and see it last Friday and it's a bit lighter as the sample colour is, but nevertheless, it has to work out just fine....very...VERY frustrating :? ..I guess (hope) it's the same as this
064209ee.JPG
2001 VW Lupo..

User avatar
koosjer55
JDM
JDM
Posts: 408
Joined: November 29th, 2005, 12:15 pm
Province/State: The Netherlands

Post by koosjer55 »

Here are some pics of the small modifications I'm working on to fit these new seats. I'm also going to fit the original so called reclining adjusters so the seats will look more in line with the car..maybe I'll attach the rear ashtray as well :wink:
Attachments
The original Accord wheels..nice but not wide unfortunately..we'll see how they will look
The original Accord wheels..nice but not wide unfortunately..we'll see how they will look
P9190839.jpg (149.87 KiB) Viewed 1922 times
P9190834.jpg
P9190834.jpg (149.41 KiB) Viewed 1922 times
P9190835.jpg
P9190835.jpg (138.84 KiB) Viewed 1922 times
P9190833.jpg
P9190833.jpg (131.44 KiB) Viewed 1922 times

User avatar
koosjer55
JDM
JDM
Posts: 408
Joined: November 29th, 2005, 12:15 pm
Province/State: The Netherlands

Post by koosjer55 »

I've tried to polish the wheels as well and wanted to go for the black sides, but I gave it up after 5 minutes...way too many spokes to polish! Just went for poudercoating and we'll see how they look under the car...tomorrow back from paint!! :P

User avatar
koosjer55
JDM
JDM
Posts: 408
Joined: November 29th, 2005, 12:15 pm
Province/State: The Netherlands

Post by koosjer55 »

It's back from paint!!! :P :P The colour is spot on and the painter has done a great job! Unfortunately my camera has problems catching the right type of hippiegreen, but believe me, it is! Tomorrow we'll be doing the first bits and pieces, so tbc.. :wink:
Attachments
Sticking the original striping was very difficult according to the painter, cause it stuck hardly (it's over 30 years old..)
Sticking the original striping was very difficult according to the painter, cause it stuck hardly (it's over 30 years old..)
P9250844.jpg (146.53 KiB) Viewed 1855 times
P9250843.jpg
P9250843.jpg (145.87 KiB) Viewed 1855 times
P9250837.jpg
P9250837.jpg (148.92 KiB) Viewed 1855 times

User avatar
koosjer55
JDM
JDM
Posts: 408
Joined: November 29th, 2005, 12:15 pm
Province/State: The Netherlands

Post by koosjer55 »

The colour on these pics is a bit off from reality, but you get the point, work in progress.

Btw, does anyone know these hood protectors (63113-634-810), check number 2? I don't know if I'll keep 'em but it's kind of interesting.
Attachments
P9260855.jpg
P9260855.jpg (147.26 KiB) Viewed 1672 times
P9260853.jpg
P9260853.jpg (140.47 KiB) Viewed 1672 times
P9260847.jpg
P9260847.jpg (149.69 KiB) Viewed 1668 times
Last edited by koosjer55 on September 27th, 2009, 2:22 am, edited 2 times in total.

User avatar
koosjer55
JDM
JDM
Posts: 408
Joined: November 29th, 2005, 12:15 pm
Province/State: The Netherlands

Post by koosjer55 »

By the way, it's DuPont (Standox) paint

User avatar
koosjer55
JDM
JDM
Posts: 408
Joined: November 29th, 2005, 12:15 pm
Province/State: The Netherlands

Image Fix Restoration

Post by koosjer55 »

Yeah DuPont its great paint too. Aree you going to spray the inner fender with "tar"(dont know how its called there,the black stuff that comes from factory).I had never seen such thing( the hood corner protector).Is that rs lettering a replica? Where did you get it?[/quote]

Yep, the inner fender will me sprayed with anti gravel. The RS emblem is from a Honda Fit/Jazz, check. You can buy these on line auctions..bit in doubt if I put one on the back too (already got a second one), I think so..it looks cool 8)

User avatar
koosjer55
JDM
JDM
Posts: 408
Joined: November 29th, 2005, 12:15 pm
Province/State: The Netherlands

Post by koosjer55 »

I paid $36,95 each

User avatar
koosjer55
JDM
JDM
Posts: 408
Joined: November 29th, 2005, 12:15 pm
Province/State: The Netherlands

Post by koosjer55 »

Rear bumper and lights mounted and all new emblems as well...me like new emblems..mmmm :wink: Choice between the 5speed emblem and the Fit/Jazz RS emblem will be made later..
Attachments
P9280850.jpg
P9280850.jpg (147.59 KiB) Viewed 1632 times
P9280849.jpg
P9280849.jpg (143.06 KiB) Viewed 1632 times
P9280846.jpg
P9280846.jpg (138.06 KiB) Viewed 1632 times
P9280847.jpg
P9280847.jpg (149.07 KiB) Viewed 1632 times

Post Reply